Filter
Top Products
Interface Implementation
PN: 1725-36134-001_E.doc
15
The FCN +[number] and LINE+[number] labels represent the key
sequence on the handset mapped to the corresponding key on the
desk set.
The handset function menu default settings are shown on each
corresponding button in the above diagram; these may be changed as
described above in Function Menu Programming. Some of these
functions (Mute, Redial, Forward, etc.) are activated by softkeys or
FCN menu options on the SpectraLink 6000 and SpectraLink
8020/8030 Wireless Telephones.
FCN + 1
MUTE
FCN + 2
CAMP ON
FCN + 3
FLASH
FCN + 6
NEW CALL
FCN + 7
PARK
FCN + 8
XFER
FCN + #
EXIT MENUS
Programming the F9600
Program the F9600 for use with the handset System as explained
below. For all of the F9600 command parameters, refer to the F9600
Command Manual.
Install the line card package
To support the handsets, the F9600 must have a B16DLA, B16DLC,
B16DLE or the latest digital line card.
The following command is used to install the line card in the F9600:
INS PKG,PKGN,NAME,[TYPE],[CN],[CND],[TSC]
The parameters in brackets can be left blank. The F9600 will default to
the correct values.
Other related commands: DEL PKG, DIS PKG
MLDT assignments
The following command is used to assign a directory number,
equipment number, etc. to a station extension for the handsets:
ASS
MLDT,[TNN/JNT:0],DN,EN,[TYPE=3],[RSM:1],[FRL:1],[COS:1],
[OT:0],[BM:0],[LA:1],[PP:1],[RP:1],[IP:1],[HF:1],[TT:1],[RB:1],
[AH:0],[PS:0],[SPDL:0],[LT:1]