Filter
Top Products
81Dialog 4187 Plus
Settings
Date and Time
Your telephone has a built in clock, which is displayed when the
handset is on-hook (idle mode). The flashing colon between hour
and minute indicates that the clock is running. The date and time is
automatically set from the telephone system every time you receive
an incoming call.
Programming date and time
If for some reason the date and time is not automatically set, the
time and date can be set manually in the telephone.
In idle mode:
² Press.
¯ or · Select the CLOCK menu.
³² Press.
The display shows the current setting, for example:
z
Enter the month, day, hour, and minutes.
You can only change the number at the cursor position. When you
have entered a number (0-9) the cursor goes to the next position
automatically.
Notes:
You always have to enter two digits at each cursor position.
For example, if you would like to program 1st of February
2004, 9 o’clock and five minutes, you have to enter: 02
(month), 01 (day), 09 (hour), and 05 (minutes).
If you enter a date that is not relevant (e.g. date 32), a
flashing letter indicates the mistake. You must enter a
correct value to be able to continue.
In case of a typing error:
¯ or ·
z
Use the Scroll keys to move the cursor and re-enter digit.
³² Press to save and exit.
CLOCK
01-15 10:38