Ericsson 4220 Telephone User Manual


 
During Calls
Dialog 4220 Lite/Dialog 4222 Office38
Send caller identity code at transfer
When transferring a call you can send the caller’s identity code or
number to the receiver’s display.
You have a voice connection with an external party on Line 1.
Ô Inquiry Press to put the call on hold.
Note: You can also press Line 2.
*77* Dial.
z# Dial the caller’s identity code or number and press.
z Call the second party.
Ô Transfer Press before or after answer.
The ongoing call is transferred with the caller´s identity code or
number.
Note: You can only use this function if the receiver’s phone
is programmed to handle identity codes. This function is
only available in newer versions of the exchange.
Dialing during a connected call
When calling interactive teleservices, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange is not already programmed to automatically convert your
entered digits into DTMF signals, you need to activate the function
during the call.
During an ongoing call:
9z Press and dial the requested digits.
Entered digits are transferred as DTMF signals.
Note: Finland, press
1 and dial the required digits.