Filter
Top Products
57
Dialog 3213
Paging
Paging (optional)
Persons equipped with a wireless paging receiver or assigned to
a lamp signal, can be paged from a telephone set. Depending on
the type of paging system it is possible to send digit messages or
voice messages to the paged person.
Paging can also be initiated and answered during an ongoing
call. Make an Inquiry call and proceed according to the
appropriate procedure for the type of connected paging system.
You can then either return to the ongoing call or transfer the
paging call to the person that was put on hold. If this person is
an external subscriber, your exchange must be programmed for
this function.
If you receive a congestion tone when paging, this indicates that
the paged person has his paging receiver in the charging rack
and is probably out of the office.
Paging receivers without a display and paging
via lamp signals
To initiate
When there is no answer or a busy tone, keep the handset off hook:
7
Press
Wait for an answer with the handset off hook.
If you want to start paging without calling the person:
*
81
*
Press
#
Dial the extension number and press
Wait for an answer with the handset off hook.