Filter
Top Products
16
Dialog 3213
During Calls
Send caller identity code at transfer
When transferring a call you can send the caller´s identity code or
number to the receiver´s display.
You have speech connection with an external party on Access 1.
Inquiry Press to put the call on hold
Note: You can also press Access 2.
*
77
*
Press
#
Dial the caller´s identity code or number and press
Call the second party
Transfer Press before or after answer
The ongoing call is transferred with the caller´s identity code or
number.
Note: You can only use this function if the receiver´s tele-
phone is programmed to handle identity codes. This
function is only available in newer versions of the tele-
phone exchange.
Dialling during a connected call
When calling interactive tele services, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange is not already programmed to automatically convert
your entered digits into DTMF signals, you need to activate the
function during the call.
During an ongoing call:
9
Press and dial the requested digits
Entered digits are transferred as DTMF signals.
Notes:
- You can also press ETE (see display).
- Finland-press 1 and dial the required digits.