Filter
Top Products
Page 7
The second line displays No Unread
Messages or 1 Unread Message to show how
many messages have been received but not
viewed. Sometimes, another message,
Memory Full may alternate with the message
status. This means that the memory is almost
full and the next message may overwrite the
oldest read message.
The third line shows the status of the alert;
Silent to warn that the audible alert has been
turned off or No Vibrate to show that the
vibrate alert has been turned off. When both
audible and vibrate alerts are turned off, Silent
and No Vibrate alternate at 2 second intervals.
If nothing is displayed, both audible and vibrate
alert are turned on.
The bottom line may display Replace Battery
to indicate that the battery is low and should be
changed as soon as possible. Radio Off may
also be displayed on the bottom line. This is a
special battery saving feature. Some MITs are
programmed to display Out Of Range on the
bottom line when they are out of range of a
transmitter.
Switching Off Your MIT Message Pager
When the standby screen is displayed, press
and release the > button. The options screen
will now be displayed.