Filter
Top Products
11
RUN ENTRY
By pressing "3" from the MAIN menu the unit displays the following:
VIEW/DELETE RUNS = 1
ADD RUNS = 2
TSR = 3
or
RATIO/SLET = 3
“TSR” (throttle stop ratio) is only displayed if the unit in TS MODE and
more then two runs has already been stored. Pressing "3" displays the
throttle stop ratio.
“RATIO/SLET” is displayed only if the unit is in ET MODE and more
then two runs have already been stored. Pressing 3 displays your SEA
LEVEL ET and your ALT/ET ratio. Your ALT/ET ratio tells the
amount of change in ET there is for every 100’ of altitude change.
By pressing "1" you can view or delete runs you have already stored.
Use the SCROLL key to view runs. If you want to delete a run you have
scrolled to press the CLEAR key. By pressing the ENTER key when
viewing a stored run it will show the Temperature, Humidity, and
Pressure values stored for that run.
By pressing "2" the following ADD RUNS menu will be displayed:
Store with->
CURRENT = 1
HELD = 2
MANUAL = 3
You can store a run by using the current weather conditions by selecting
1, by using the “held” data that you saved by earlier by selecting 2, or by
entering your own values by selecting 3.
After selecting 1 or 2 the following will be displayed: