Filter
Top Products
6
INSTALLATION (Cont.)
3. Install one 9 volt battery.
4. Replace battery door connect the AC
adaptor.
5. Install a replacement battery once a
year to ensure proper operation of the
power failure protection feature.
Your message LED will flash rapidly
until 9 Volt battery is installed. Your
unit is fully functional - battery is
needed for power failure backup
ONLY.
Connect to Telephone Line
1. Plug your telephone into the modular
TEL jack in the back of your unit (Fig. A).
NOTE: We do not recommend that you
plug a cordless telephone into your unit.
Operation of a digital answering system
may cause interference on your cordless
telephone.
2. Plug the straight end of the cord into
a modular wall jack. Make sure plug
snaps firmly in place (Fig. B).
or
3. With a four prong style jack, simply
use a plug in modular adaptor (see
Fig. C).
NOTE:
The jack RJ11C of the fixed line cord
complies to FCC Part 68.
Connect to AC Power
(Use only SYSTEM EM1200 AC
Adaptor of Output AC 9V 150mA)
1. Plug AC Adaptor cord into the back
of your unit (Fig. A).
2. Plug AC Adaptor into a standard
120 Volt wall outlet.
3. When your unit is initially plugged in,
the message indicator is consistently
flashing slowly to prompt you to record
your outgoing announcement.
Figure A
Figure B
Figure C