Filter
Top Products
10
SPECIAL FEATURES (Cont.)
Power Failure Protection/Battery Back
Up
If power failure occurs, or the plug
comes out of the wall, your unit will shut
down until the power is restored.
If you have installed a 9 volt battery, any
messages recorded before the power
failure will be saved. The message
indicator will flash indicating the number
of messages received.
If your unit is not operating properly
when the power is restored, proceed
with a unit reset.
To Reset
1. Unplug the AC adaptor from the
power outlet.
2. Remove the 9 volt battery. Replace
with a fresh 9 volt battery (see page 5).
3. Plug AC adaptor back into power
outlet.
4. Record a new outgoing announcement
(see page 7).
IMPORTANT
During a power outage, your unit will
not function even if a 9 volt battery is
installed. The battery will save your
outgoing message and any incoming
messages you may already have
received so that you can play them
once power comes back on.