Emerson MODEL EM1200 Answering Machine User Manual


 
13
PROBLEM
No answer
No power
No incoming
messages
recorded
POSSIBLE CAUSE
AC adaptor is disconnected
from wall outlet or back of
unit
AC adaptor is disconnected
from wall outlet or back of
unit
Unit is in the "OFF" mode
Power to electrical outlet
may be off
Power to electrical outlet
may be off
Telephone line is not
connected to wall jack
Telephone line is not
connected to wall jack
No audio on outgoing
greeting
CORRECTIVE ACTION
Reconnect AC adaptor into wall
outlet or back of unit.
Reconnect unit into wall outlet or back of
unit. Try connecting to a different wall outlet.
Check to see if electrical outlet is controlled
by a light switch and power is on, or wall
outlet may not be functioning, try connecting
to a different wall outlet.
Check to see if electrical outlet is controlled
by a light switch and power is on.
Reconnect AC adaptor into wall outlet or
back of unit. Try connecting to a different
wall outlet.
AC adaptor is disconnected
from wall outlet or back
of unit
Power to electrical outlet
may be off
Check to see if electrical outlet is controlled
by a light switch and power is on.
Check your outgoing greeting. If you do not
hear audio, record a new outgoing
announcement. See the section an
"Recording Your Outgoing Announcement".
Check to verify message counter is lit. Press
Answer ON/OFF control to turn unit on.
Connect telephone line into wall jack.
Telephone wall jack may not be functioning,
try connecting unit into a different telephone
wall jack.
Connect telephone line into wall jack. Try
connecting unit into a different telephone
wall jack.
Troubleshooting Guide (Cont.)