Filter
Top Products
Configuration through IVR DVG-2101S User Manual
51
Configuration through IVR
The VoIP Adapter provides a convenient IVR (Interactive Voice Response)
function to help you query and configure the basic settings of the VoIP Adapter
with a phone and without turning on a PC. To access IVR mode, plug a phone
into the VoIP Adapter and then pick up the handset and press * (star) 666 #
(pound). You will hear voice instructions through the handset. Follow the
system’s instructions to set up or query the VoIP Adapter’s settings. To exit IVR
mode, simply hang up the phone. The IVR function only supports DHCP and
Static mode configuration, other connection types need to be done via the web
configuration interface. If you pick up the handset and can not hear a tone or
press *666# without IVR response, please press the Reset button for 1-2
seconds and try again. Please refer to the Rear Panel diagram on page 5 of
this manual for the Reset button location.