Filter
Top Products
2
Getting Started
1
1
Charge your headset
Fully charge your headset before using it for the first time. This takes approximately five
hours. To charge your headset’s battery, connect the power adapter to your headset.
Consequently, charging your headset takes three hours.
2
2
Pair your headset and mobile phone
1. If your headset is turned on, turn it off by pressing and holding the Multi-function
button until the LED turns red.
2. Place your headset within one meter of your mobile phone.
3. Press and hold the Multi-function button and one of the Volume buttons
simultaneously, until the LED alternately blinks red and blue.
4. Turn on your mobile phone’s Bluetooth feature. For more information, see your
mobile phone’s documentation.
5. Set your mobile phone to detect Bluetooth devices.
6. From the list that appears, select CB2455Creative.
7. When prompted for a passkey, enter 0000 to complete pairing.
• Some mobile phones require an additional connection step after pairing.
• If the pairing is not completed within two minutes, your headset turns itself off
automatically.
• If your headset is successfully paired to your mobile phone, the LED blinks blue five times,
and then once every five seconds.
En_CB2455.book Page 2 Wednesday, June 8, 2005 9:32 AM