Cortelco 730901-TP2-27F Cordless Telephone User Manual


 
~
AM
#
TORAL
Preparing for Use
Before you can use cordless telephone ,you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)
1. Place the HANDSET on the BASE UNIT for 12 hours .
2. After 12 hours ,remove the HANDSET from the BASE UNIT.
3. Raise or reposition the BASE UNIT ANTENNA for the best reception.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged , it remains
functional for approximately 4 hours of continuous use and approximately three days
when the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving calls
1. When the phone rings, lift the HANDSET and
press the button. The HANDSET LCD
Screen will display "CALLS" and "TALK",and
the BASE UNIT IN USE LED indicator will
light up.
2. Start your conversation
3. To end your conversation, either press the
button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the
BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
NOTES:
1. The Call Timer will start to count once you press the button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.
Cordless Telephone Operation
8
CALLS
When "CALLS"appears on the LCD Screen,
it means the HANDSET IS OFF-HOOK
(connected to the telephone line).
Minutes
Call Timer Display
Seconds or Channel (Press the scan/del
button to display the channel).
CALLS
TALK
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
Function Operation
This unit contains the following special functions:
A. LANGUAGE F. AREA CODE
B. FIRST RING ON/OFF G. FLASH TIME
C. TIME SET H. PAUSE TIME
D. RINGER VOLUME I. VOICE MAIL
E. LCD CONTRAST J. MSG WAITING
Caller ID System Operation
19
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
AM
#
#
TORAL
KEYPAD Button
KEYPAD Button
KEYPAD Button KEYPAD Button KEYPAD Button
KEYPAD Button
KEYPAD Button KEYPAD Button
KEYPAD Button
KEYPAD Button
To access, press the button and hold down while in STANDBY mode,
then press the TELEPHONE KEYPAD buttons or the SCROLL
DOWN button.
/ VOICE MAIL