Filter
Top Products
WALL MOUNT INSTRUCTIONS
1. Mounting wedge should already be installed onto the base. If not, install mounting
wedge onto base.
2. Connect the adapter and the line cord. See Steps 2 & 3 under “Installation” for
specific instructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount posi
tion, plug the short end of the coiled cord into the handset, and then plug the other end
of the cord into he base.
4. Place the handset on the base.
Note: To alter the mounting bracket angle, pull
the lever up and rotate the mounting wedge.
The unit will be shipped in wall mount position.
Lever to alter angle.
UNIT SETUP
FACTORY PRESETS
The following table shows you the factory settings for your unit:
Display Setting
SELECT LANGUAGE English
LCD CONTRAST 3
ENTER HOME AREA -
SET ACCESS CODE -
SELECT LDS CODE 1
FLASH TIMER 600 ms
SELECT LINE 1/2 Line 1
DIAL MODE Tone
VOICEMAIL NUMBER -
#3 SEC PAUSE 1
VM PASSWORD -
EDIT TIME & DATE -
RINGER CADENCE 2 3
RINGER VOLUME 2 5
RINGER CADENCE 1 4
RINGER VOLUME 1 5
STUTTER TONE No
Note: After you have set up the
unit completely for the first
time, use the MENU button to
review or reprogram the Lan-
guage, Area Code, Program
VM, LDS Code, or Setup Fea-
tures.
3