b. When you hear a dial tone, dial the number or press the auto memory
button just as you would on any other push-button telephone. The number
will appear on the display window.
c. When your party answers, adjust the volume of the conversation by pressing
the Volume Bar on the base of the telephone.
d. After the conversation has finished, press SPEAKERPHONE to hang up.
Note:
1. If you wish to switch from speakerphone to handset, simply lift the handset.
2. If you wish to switch from handset to speakerphone, press and release
Speakerphone and then hang up the handset.
DURATION COUNTER
A built-in counter will start counting from your reference 6 seconds after you lift the
handset or 6 seconds after you dial a telephone number.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The
MUTE Indicator will light up and remain lighted until you resume your conversation. Also,
“MIC MUTED” will show in the display. To resume the conversation, press MUTE. The
MUTE indicator will go out and your call can continue.
AUTOMATIC MEMORY
To Store A Number In Memory:
1. Press the SAVE button, [SAVE TO?] appears on the display
window.
2. Press the desired memory location. (M1-M10)
3. [ENTER NUMBER>] appears on the display.
4. Enter the desired number using the keypad (maximum of 24 digits).
Note: The memory locations can be chained together to store numbers of
longer length.
5. Press the SAVE button, [ENTER NAME] will appear on the display window.
6. Enter name using keypad. After entering name..
7. Press the SAVE button. Dislplay will briefly read [NUMBER SAVED].
To Dial A Phone Number In Memory
1. Lift the handset and wait for a dial tone.
2. Press the desired memory location (M1-M10)
3. The number will be displayed. To dial the number, lift the handset, press the
SPEAKER button or press the DIAL button.
VOLUME BUTTON
A built-in amplifier feature allows you to increase the listening volume in the receiver of
the handset when speaking with your party. When needed, press the VOLUME button
8