Filter
Top Products
13
1. Press PAUSE and release at any point in the dialing sequence where a pause is
desired.
2. PAUSE can be pressed more than once to create a longer pause.
HOLD BUTTON
1. NORMAL MODE
a. Press HOLD and hang up the handset. HOLD will light up and remain lighted
until you resume your conversation.
b. To resume your conversation, lift the handset or that of any extension phone on
the same line or press and release SPEAKER. The HOLD indicator will go out
and your call can continue.
2. PBX MODE
Press HOLD. The phone will dial out the code. Depending on the PBX, it may now be
necessary to hang up the handset. Note that HOLD will not light in this mode.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX service or for use of Call
Waiting from your local telephone company. If you have Call Waiting service, you can
use the Call Waiting function per the following instructions.
1. While having a conversation, another party calls and you hear a tone.
2. Press FLASH once and release. The first conversation is placed on hold and the
second call can be answered.
3. Press FLASH again and release. You may speak to the first caller again and the
second call is placed on hold.
HEADSET BUTTON
This telephone will accept either a 2.5 mm cell phone-style headset or an RJ type
headset. Use HEADSET to connect and disconnect from calls.
DATA PORT
This is a connection which is in parallel with the telephone line. It allows the connection
of a device such as a modem, caller ID, or an answering machine. This connection is
located on the bottom of the phone and is marked DATA.
CONTRAST BUTTON
Contrast can be altered whether on hook or off hook by pressing CONTRAST. There
are 3 contrast levels.