Filter
Top Products
10
8. When [FLASH TIMER (MS)] appears, press REVIEW UP to toggle between
600ms, 100 ms, and 300ms. Press MENU to confirm selection.
9. When [RINGER CADENCE] appears, the default setting is 3. To alter this setting,
press REVIEW UP. There are 10 ringer cadences and each one will be played as
you scroll through them. Press MENU to confirm selection.
10. When [RINGER VOLUME] appears, the default setting is 3. To alter the ringer
volume, press REVIEW UP. There are 4 ringer volume levels plus OFF. Each one
will be played as you scroll through them. To turn the ringer off, select [OFF] in the
Menu. Press MENU to confirm selection.
11. When [RINGER SUPPRESS] appears, use 1 to activate this feature or 2 to deacti-
vate it. This feature will suppress the first ring so that caller ID can be delivered to
the phone before ringing. Set this feature ON if you plan to assign any distinctive
ring cadences.
12. When [VOICEMAIL NUMBER] appears, enter the voicemail number (maximum of
18 digits) using the keypad. To delete a number or digit, press REVIEW DOWN.
After the desired number has been entered, press MENU to confirm selection.
13. When [#3 SEC PAUSES] appears, enter the desired number of pauses using the
keypad. This controls how long the phone will wait after dialing the voicemail
number before dialing the voicemail password. Press MENU to confirm selection.
14. When [VM PASSWORD] appears, enter the desired password using the keypad
(maximum of 5 digits). To delete a number or digit, press REVIEW DOWN. Press
MENU to confirm selection.
15. When [HOLD MODE] appears on the display, press REVIEW UP to select either
NORMAL or PBX. In NORMAL mode, the HOLD button activates a local hold
function. This can be released at any parallel phone. In PBX mode, the HOLD
button dials a code which places a PBX line on hold. If you select PBX mode, see
Step 20 to program the code.
16. When [RELEASE MODE] appears on the display, press REVIEW UP to select
either NEWCALL or HANGUP. In NEWCALL mode, the RELEASE button
provides a 1.5 second line break. This will ensure that the line is clear and a new
call can be dialed. In HANGUP mode, the RELEASE button drops the line and a
new connection is not made.
17. When [SDT TIME] appears on the display, use the key pad to change this value.
This is the time that the phone will remain on hook before checking the line for
stutter dial tone. The default value of 1700 is correct for almost all systems. Only
change this value if directed by your message waiting provider.
18. When [HIDE REDIAL NUMBER] appears, use 1 to activate this feature or 2 to
deactivate it. When this feature is activated, only the first 8 digits of a redialed
number will be displayed. This can be used to protect the privacy of long distance
codes or other access codes.
19. When [ENABLE KEY TONE] appears, use 1 to activate this feature or 2 to deacti-
vate it. When this feature is activated, a tone will sound in the receiver or the
speaker when a key other than the number keys are pressed.
20. If PBX Hold was selected, perform the following steps to store a code under the
HOLD button.
a. Press SAVE
b. Press HOLD
c. Dial the code to be stored
d. Press SAVE