Filter
Top Products
16
CALLER ID FEATURES
CALL WAITING DISPLAY
Call-waiting service alerts you to a new call by playing a tone while you are on a call.
Call Waiting Caller ID not only tells you there is another call waiting, but lets you
know who the caller is before the call is answered. The name and number of the
incoming call will be shown on the unit’s display. This infomation will remain dis-
played for 16 seconds. In addition to this, the CALL WAITING symbol (CW) will
flash.
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will
show the NEW symbol, the phone number, the caller’s name, and the call time
for 20 seconds. The REPEAT symbol will appear if the call has come in more
than once.
2. After 20 seconds with no activity, the display will default to the Stand-By screen
until another call is received or a button is pressed.
REVIEWING CALLS
1. When in Standby Mode, press REVIEW UP or REVIEW DOWN to see the
stored calls. This unit stores up to 99 calls.
2. The NEW symbol will be removed from each call after it is reviewed.
3. The reviewed number can be stored into any of the auto memory buttons:
a. With the number displayed, press SAVE.
b. [SAVE TO ?] will appear. Press M1-M5 or SHIFT M1-M5. Press
SAVE again.
c. The caller’s name will appear. Press SAVE again.
d. [SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN
to select the desired ring cadence. Press SAVE again.
4. When the end of the call records is reached, the display will show [-END OF
LIST- ].
DELETING CALLS
Individual call
1. Press DELETE. The display will show [DELETE? 1:YES 2:NO].
2. Press 1 to confirm the deletion.
All calls
1. Press and hold DELETE for more than 3 seconds. The display will show
[DELETE ALL 1:YES 2:NO].
2. Press 1 to confirm the deletion.