Vertical Communications R DSU Telephone User Manual


 
To store personal speed dial numbers,
1. Press INTERCOM and dial ✳✳2.
2. Dial memory location (1–0).
3. Press line button, or dial 1, 2, 3,or4to select line groups 1–4
—OR—
dial 0 for system to select line.
4. Dial number to be stored (16 digits maximum). Press TAP to store
hookflash and press HOLD to store pause (if needed).
5. Press TRANSFER/CONFERENCE, dial next location, select
line, and dial another number to be stored.
6. Repeat previous step until finished, then press SPEAKER.
To store special purpose feature buttons,
1. Press INTERCOM and dial ✳✳1.
2. Press programmable button.
3. Dial feature code:
5 = response messaging button (then dial 0–9 for message)
6 = transfer to voice mail button (then dial extension number)
7 = assist button (then dial 0-9 or * for message)
8 = subdued off-hook voice announce button
98 = group listen button
# = auto redial button
4. Press TRANSFER/CONFERENCE then next programmable
button and dial another feature code.
5. Repeat step 5 until finished, then press SPEAKER.
NOTE: The Federal Communications Commission (FCC) requires that
when programming emergency numbers and making test calls
to emergency numbers you do the following: (1) Remain on the
line and briefly explain to the dispatcher the reason for the
call; (2) always make such a test call during the off-peak
hours, such as early morning or late evening.
Programming Your Telephone GCA70–248
9 – 2 Non-LCD Station User's Guide