Filter
Top Products
Using The Other
Telephone Features
7.1 Using the Recall/Flash Feature
•
If your system has been configured for flash,
1. Press TAP to generate a timed flash signal while on line.
•
If your system has been configured for recall,
1. Press TAP to disconnect as if you had hung up.
7.2 Making a Paging Announcement
•
To page through an external paging amplifier (if your system
provides this feature),
1. Lift handset.
2. Press paging line select button and dial page access code (see your
attendant for code)—if paging is connected to a dedicated paging
port, dial INTERCOM 89.
3. Make announcement.
•
To page through system telephones (all- call and zone paging),
1. Lift handset.
2. Press INTERCOM and dial all-call or zone number:
84, 85, or 86 = zones 1, 2, or 3
87 = all-call.
3. Make announcement.
4. Hang up handset or wait for an answer.
7
GCA70–248 Using The Other Telephone Features
Non-LCD Station User's Guide 7 – 1