Filter
Top Products
8.2 Sending Messages To LCD Speakerphones
NOTE: You can set system-supplied messages to be displayed by
calling an LCD speakerphone.
•
To turn LCD messaging on,
1. Press INTERCOM.
2. Dial ✳ 02.
3. Choose message code number (0–9).
4. Press SPEAKER.
8.3 Station-To-Station Messaging
•
To activate station-to-station messaging (station must have BLF
appearance at called station),
1. Make intercom call and hear ring-back tone.
2. Dial ✳ 7; your station’s BLF light turns on at called station.
3. Hang up handset.
•
To cancel station-to-station messaging,
1. Press INTERCOM and dial #7.
2. Dial extension number of station where you left the call-back
indication.
3. Press SPEAKER.
GCA70–248 Programming Your Telephone
Non-LCD Station User's Guide 8 – 3