Vertical Communications R DSU Telephone User Manual


 
7.3 Switching Between Pulse and Tone
To convert to tone while dialing—if the local telephone service is
pulse (rotary),
1. Press # at point in dialing sequence where conversion to tone is
required.
NOTE: Pulse/Tone switching can be programmed into memory keys
by pressing # during number storage.
7.4 Forwarding Calls
To forward personal calls to another telephone,
1. Press INTERCOM and dial 05,
2. Dial extension number of telephone to which calls are to be
forwarded.
To cancel personal call forward,
1. Press INTERCOM and dial #05.
To forward all calls to another telephone,
1. Press INTERCOM and dial 5,
2. Dial extension number of station to which calls are to be
forwarded.
To cancel all-call forward,
1.
Press INTERCOM and dial
# 5.
NOTE: For each personal call received during call forward, you will
hear a ring reminder (short tone burst) to remind you that
calls are being forwarded.
GCA70–248 Using The Other Telephone Features
Non-LCD Station User's Guide 7 – 3