Filter
Top Products
Special Purpose Feature Buttons
Response Message Button
This program letsyou setup a buttonto beused for making a non-verbalresponse to
a SOHVA or an intercom call. The response appears in the display of the calling
station.
·
To assign a button for nonverbal response:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use for message
access.
3. DIAL
5.
4. DIAL a message number (
0 through 9 ).
NOTE: Programmed messages available for use are created by the system
attendant and are listed in a table on page 42.
5. PRESS SPEAKER to end.
Transfer Button
This program lets you set up a button to be used for transferring to a third party. Most
often, you use this feature for transferring calls you wish to retain to voice mail.
·
To assign a “transfer to voice mail” button:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use.
3. DIAL
6.
4. DIAL extension number.
5. PRESS SPEAKER to end.
Subdued Off-Hook Voice Announce (SOHVA) Button
You can program a button at your station that you can press to enable the delivery of
a SOHVA call.
50 Non-LCD Speakerphone Station User’s Guide
Programming GCA70-248