Filter
Top Products
Call Parking
You can placea call on holdin the systemso that it canbe answered fromany station
that does not have a line appearance for the call. You accomplish this by placing the
call in one of nine park orbits, where the call remains until it is answered.
·
To place a call on hold within the system where it can be
answered at any telephone in the system (parking a call in
orbit),
1. While on the call, PRESS INTERCOM AND DIAL *.
2. DIAL code for park location (orbit) (
91 to 99 for orbit
1–9).
3. REMEMBER the code for later use OR make it known to those
who need to know in order to retrieve the call.
·
To retrieve a call that was placed on hold in the system
(parked),
1. From any station, PRESS INTERCOM AND DIAL #.
2. DIAL code for orbit 1–9 (
91 to 99 ).
Handling Park Recalls
When a parked call times out of the system, it returns to your telephone in the form of
a park recall (you will hear four short tone bursts at 12-second intervals).
·
To answer a park recall,
1. PRESS associated line button. The call will then connect to your
station.
·
To place a park recall on hold at your station,
1. PRESS associated line button. The call will then connect to your
station.
2. PRESS HOLD. If the call remains on hold for a period of time, it
will ring back to your telephone as a hold recall.
38 Non-LCD Speakerphone Station User’s Guide
Advanced Call Handling GCA70-248