Filter
Top Products
Customer Assistance WarrantyIntroduction
19
Nothing comes close to a Cobra
™
Operation
18
English
Mode Functions
VibrAlert
®
And Call Tones
•
Your microTALK
®
radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently, or both.
To Change Call Settings:
1. Press the Mode button until
the
Call Setting icon flashes
on the display. The current
setting (vibrate + ring,
vibrate only, or ring only)
is displayed.
2. Press the
Channel Up or
Channel Down button to
change the call setting.
3. Choose one (1) of
the following:
a. Press the
Mode button
to enter the new setting
and proceed to other functions.
b. Press the
Lock button to enter the new
setting and return to
Standby mode.
Ten (10) Call Tone Settings
•
You can choose between ten (10) different Call Tone settings to
transmit a unique call alert.
To Change A Call Tone Setting:
1. Press the Mode button until the letter “C” and
the current call tone Number (01 through 10)
is displayed.
2. Press the
Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one (1) of the following:
a. Press the
Mode button to enter the new
setting and proceed to other functions.
b. Press the
Lock button to enter the new
setting and return to
Standby mode.
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk
button. This alerts the other party that you are finished talking and
it is OK for them to speak.
To Turn Roger Beep On Or Off:
1. Press the Mode button until the
Roger Beep icon flashes on the display.
The current
On or Off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep On or Off.
3. Choose one (1) of the following:
a. Press the
Mode button to enter
the new setting and proceed to
other functions.
b. Press the
Lock button to enter
the new setting and return to
Standby mode.
Keystroke Tones
•
With Keystroke Tones turned On, your radio will sound beeps
each time you press a button or change a setting.
To Change Keystroke Tones:
1. Press the Mode button until the Keystroke
Tones
icon flashes on the display. The current
On or Off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones On or Off.
3. Choose one (1) of the following:
a. Press the
Mode button to enter the new
setting and return to
Standby mode.
b. Press the Lock button to enter the new
setting and return to
Standby mode.
Operation
Mode Button
Call Tone Setting
Channel Button
Mode Button
VibrAlert
®
+ Ring
VibrAlert
®
Only
Ring Only
Channel Button
Mode Button
Keystroke Tones On
Channel Button
Mode Button
Roger Beep On
Channel Button