Filter
Top Products
Customer Assistance WarrantyIntroduction
15
Nothing comes close to a Cobra
™
Operation
While setting privacy code scan, if you do not press any buttons for
15 seconds, your radio will automatically return to
Standby mode
on the channel/privacy code that was displayed before you entered
mode functions.
During Privacy Code Scan (while receiving an incoming
transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to
Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning privacy codes.
If you press the
Talk button while scanning and not within ten (10)
seconds of receiving a transmission, you will transmit on the
channel/privacy code on which you last received a transmission.
This will return the radio to
Standby mode.
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning privacy codes.
During Privacy Code Scan (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
This will return the radio to
Standby mode.
b. Press the Mode button to proceed to set memory location
scan (see page 16 for further details).
c. Press the
Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last received a transmission.
14
English
Mode Functions
During Channel Scan (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the channel
or channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last received a transmission. This will return the radio
to
Standby mode.
b. Press the Mode button to proceed to set privacy code scan on
the channel that was either displayed before you entered mode
functions or on which, during channel scanning, you last
received a transmission (see below for further details).
c. Press the
Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last received a transmission.
Privacy Code Scan
•
Your microTALK
®
radio can automatically scan the Privacy Codes
(00 through 38) within one (1) channel.
To Scan Privacy Codes:
1. While in Standby mode, press the Channel
Up
or Channel Down button to choose the
channel on which you wish to scan privacy
codes.
2. Press the
Mode button until the Scan icon and
the privacy code numbers flash on the display.
3. Press the
Channel Up or Channel Down
button to begin scanning privacy codes
within the channel you selected.
The
Scan icon will continue to be displayed when
privacy code scan is
On. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain
on that channel/privacy code for ten (10)
seconds.
Operation
Channel Button
Mode Button
Select Channel
Scan Privacy Codes