Filter
Top Products
Select main channel by pushing and releasing
buttons.
Operation
7
Note
Units must be on same
channel and subchannels
to communicate.
Note
Channels 8-12 generally are
less used and give better
results for communications
in most areas.
Note
Push and hold the
buttons for fast channel
advance.
Select Main
Channel
Operation
6
Select Main Channel (1-14)
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on
and then the LCD will go through a 3 second
self-test and then go to operational mode.
Select channel by pushing and releasing
buttons.
2
1
Note
CTCSS 00 allows you to
hear all CTCSS codes -
01 through 38 - in that
channel
Note
If you push and hold the
button,the LCD display will
cycle through the different
functions.
Note
To return to operational
mode and not save your
last setting push and
release button.
Select CTCSS
Subchannel
Select CTCSS Subchannel (00-38)
The CTCSS (Continuous Tone Controlled Squelch
System) is a great convenience when you are in
an area with many radios. It acts like a gate to
transmissions from other radios. Once your radio
is set to a CTCSS code,you will only hear trans-
missions from other radios on the same channel
and the same CTCSS code.
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on and
then the LCD will go through a 3 second self-test
and then go to operational mode.
continued
2
1
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 6