Filter
Top Products
Advanced Features
Note
For more information see
Talk Confirmation Tone
section on page 14.
Note
To restore the Talk
Confirmation Tone repeat
steps 1- 3 as shown to
the left.
Note
When you push and hold
the PTT button,the unit
exits out to operational
mode.
If,after 10 seconds no selec-
tion is made,the unit will
return to operational mode.
Talk Confirmation Tone Indicator
To te m po ra r ily eliminate the Talk Co n f i rm a tion To n e :
43
Push and hold button. icon will
disappear or press and hold function key to
proceed to next function.
3
Push and re l e a s e b u t ton until icon flashes.
1
Push and release b u t t ons until
icon appears in the LCD display.
2
Advanced Features
Note
The Key Stroke Tone and
Talk Confirmation Tone can
be temporarily turned on or
off at any time while in
operational mode.
Tone Setting
The Key Stroke Tone and Talk Confirmation Tone
can be temporarily turned on or off during the
operation of your MicroTalk 2-Way Radio.
Key Stroke Tone Indicator
You will hear an audible tone when any button is
pushed (except PTT button). You can turn the
audible tone on or off by:
Tone
Settings
42
To return to the audible mode, push and hold
button until icon appears in the LCD
display.
Push and hold button until icon
disappears in the LCD display.
1
2
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 42