Filter
Top Products
Advanced Features
31
Push and release buttons and the unit
will begin scanning the main channels.
Unit will continue to scan all main channels
and stop if an incoming transmission is
detected.
3
4
Your MicroTalk will pick it up for 10 seconds.
Within 10 seconds you can:
Push and hold button and talk. Your radio will
return to operational mode on that channel.
or...
Push and release button to rescan the
main channel.
or...
Proceed to subchannel scan on next page.
A
B
C
continued
Advanced Features
30
Note
The MicroTalk “zeros out”
the subchannels to allow
scanning of the main
channels.
Scan Function
Scan Function
Push and release button until icon and
main channel flashes.
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on
and then the LCD will go through a 3 second
self-test and then go to operational mode.
2
1
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 30