Filter
Top Products
ADDITIONAL HANDSET FEATURES
AUTO ANSWER (ON/OFF)
Enables you to answer the phone while it is ringing by picking up the handset from the
base and hang-up by placing the handset in the base.Alternatively you can still hang-up
by pressing the button.
To have this function option activated, the mode must be set to ‘Auto ON’,by
Pressing to enter Setup mode.Use arrow keys to
arrive at option 4. Press to change the current setting.
A confirmation beep will be emitted and will return to
Standby mode.
MICROPHONE MUTE FUNCTION
While on call press to mute microphone.
Screen reverts to call timer, indicates
the microphone is muted.
Press to un-mute.
Screen reverts to regular call display.
DIAL MODE
Enables the user to choose between Tone or Pulse for dialling mode.
Press to enter Setup mode. Use arrows to
arrive at option 7.
Press .
Use arrow keys to scroll between options.
Press to choose the displayed setting.Phone will
emit confirmation beep, and return to standby mode.
NOTE:The factory default setting is "Tone". It should not be
necessary to adjust this setting if an outgoing call can be made.
GB
18
GB D E E S F R I T NL PT
GB
17
BASE UNIT FUNCTIONS
VISUAL RINGER
Lights Flash on the base unit Visual Ringer (14) when the phone rings.Refer to Fig E or F.
BASE UNIT RINGER VOLUME CONTROL
Adds to the existing ring signal transmitted by the handset.
Switch to increase or decrease the base unit Ringer Volume
(15). Refer to Fig E or F.
The OFF position turns the base unit ringer off.
BASE RINGER SETTINGS
Press . Use arrow keys to arrive at option 5.
Press .
The screen displays the current setting for the
base unit Ringer Volume
(15) – 3 levels and OFF.
If the volume is ON,a choice of nine (1 to 9) ring tones is given.
Use arrow keys to scroll through tones.
If the volume is OFF,the phone emits a confirmation beep
and returns to standby mode.
Press to confirm the choice.
NOTE:When the Base Ringer switch is in OFF position,
it overrides the settings for this feature.The settings will
become active when the switch is in ON position.
PAGING FUNCTION
Allows for a misplaced handset to be found.
Press the Page Button (16) and the handset
will be paged.The back light will flash and the handset
display will show the following. Refer to Fig E or F.
Press the Page Button
(16) or any button in the handset to
stop the page tone.