Filter
Top Products
UNIDENTIFIED INCOMING CALL
When an unidentifiable incoming call is received,
no Caller ID record is displayed – the screen line is blank.
NOTE: Up to 18 digits for incoming Caller ID calls
can be displayed.
ADDITIONAL FEATURES
FLASH TIME SETTING
This option enables the user to set the country-appropriate TBR (Timed Break Recall).
The choices are 100ms,250ms and 600ms.
Press to enter Setup mode.
Use arrow keys to arrive at option 6.
Press .
Use arrows to scroll through the three choices.
Press to enable the displayed setting. Phone emits
confirmation beep and returns to standby mode.
This is used to access certain network features such as conference calling or call
transfer etc. Please contact your network provider or PABX administrator for further
information if required.
USING FLASH SETTING
After dialling the required number press the button to flash the line to perform
some PABX function and digit ‘r’ will be shown on the LCD.
Press button to add a pause and digit ‘P’ will be shown.
The number dialled after the ‘Flash’ will not be stored in the redial memory.
GB
22
GB D E E S F R I T NL PT
GB
21
Press the right arrow button again to retrieve
the time and date of that call.
NOTE: The caller ID functionalities depend on the services
offered by your network provider.
SAVING CALLER ID RECORDS
While the Caller ID record is displayed on the handset
screen,press to store the display record.
Select a number (0-9) for which the Caller ID record is to
be stored.
The phone emits a confirmation beep and returns to the
Caller ID list.
ERASING CALLER ID RECORDS
While a Caller ID record is displayed,
press button for 2 seconds.
Press to confirm,or press
to cancel the command.
NOTE:To avoid erasing accidentally, only the displayed record will be removed.
No "Erase all" may occur.
NO CALL MESSAGE
When no Caller ID record exists in the memory,
if you press the button for 2 seconds a ‘NO CALL’
message displays on the handset screen.
Press to return to standby mode screen.