Clarity C600 Cordless Telephone User Manual


 
Getting Started
CHOOSING A LOCATION
1. This phone requires a modular phone
jack (RJ11C) and a standard 120V AC
wall outlet.
2. Plug the AC Adapter directly into outlet.
3. Do not plug other appliances into the
same outlet or have outlet controlled by a
wall switch.
4. Choose a location that is out of the way of
normal activities.
! CAUTION: USE ONLY WITH CLASS 2
(CLASSE 2) POWER SOURCE 9V DC,
400mA.
Always connect the AC Adapter to the phone
before you connect it to the AC power.When
you finish, disconnect the AC power before you
disconnect it from the phone.
INSTALLATION
Connecting Your Telephone
Carefully remove your cordless telephone from
its box. If there is any visible damage, do not
attempt to operate this equipment. Return it to
the place of purchase.
Check to be sure that you have all items that
come with your telephone.You should have a
HANDSET, BASE UNIT, BATTERY,AC
ADAPTER,TELEPHONE LINE CORD,
BELT CLIP AND OWNERS MANUAL.
If at any time you have questions about your
telephone please contact our Customer Service
Department at: 1-800-552-3368 or 423-622-
7793.
Table/Desktop Installation
CAUTION: Disconnect the telephone line cord
before connecting or disconnecting the battery
backup in the wall mount bracket.
1. Plug one end of the supplied modular
telephone line cord into the jack marked
TEL located on the back of the telephone
base as shown in the diagram.
2. Plug the modular telephone line cords
other end into a modular phone jack.
3. Insert the supplied AC Adapters plug into
the jack marked 9V DC 400mA located
on the back of the telephone base.
4. Plug the adapter into a standard
120V AC power (electrical) outlet.
8
Bottom view of phone