Clarity C600 Cordless Telephone User Manual


 
Flash
The FLASH button is activated to use custom
calling services such as Call Waiting or
Three Way Calling. Please contact your
local telephone company for information
on these services.
Mute
The MUTE button allows the user to conduct
a private conversation that you do not want the
person on the other end to hear.While
in the mute mode, the
MUTE button will
illuminate
RED and the microphone in the
handset is disabled. Pressing the
MUTE
button again will disengage the MUTE
feature.
Redial/Pause
The RD/P button both the last number redial
and the pause feature.
Battery Backup
Installing four (4) AA Alkaline batteries into the
desk/wall mount bracket attached to the tele-
phone base will offer you a limited amount of
time to continue operating your telephone in
the event of a power failure.
To Install Battery Backup Batteries:
1. Disconnect telephone line cord and remove
desk/wall mount bracket from telephone base
2. Disconnect battery backup connector from
the telephone base
3. Install four (4) AA Alkaline batteries with
negative (-) end of battery touching the spring
4. Connect battery backup connector to ter-
minal on bottom of telephone base
5. Install desk/wall mount bracket to telephone
base
Feature Set-up
When an incoming call is received, these lights
will flash.The handset visual ringer
will also stay lit while the phone is in use.
BOOST ON/OFF Switch
This switch will disable the reset feature of the
BOOST Clarity Power button as follows:
ON When the Boost ON/OFF switch is
set to
“ON”, the Boost function will be ON
every time a call starts, and will default to ON
every time the phone hangs up. During
a call, the
BOOST Clarity Power button can
toggle the Clarity Power
ON or OFF according
to the users needs.
OFF When the Boost ON/OFF switch is set
to
“OFF”, the Boost function (Clarity Power)
will be
OFF every time a call starts, and the
user will need to press the
BOOST Clarity
Power button in order to gain the extra level of
amplification. If the phone hangs up, the
Clarity Power will reset to
OFF. During a call,
the
BOOST Clarity Power button can toggle
the Clarity Power function on or off accord-
ing to the users needs.
Pulse/Tone
Slide the switch to the type of telephone
service you have; tone for touch-tone service or
pulse for rotary dialing. Please check with your
local telephone company if uncertain
of the type of service.
E
N
G
L
I
S
H
15
CAUTION: VOLUME WILL BE
LOUD WHEN BOOST SWITCH
IS SET TO “ON”.
!