Filter
Top Products
Viewing Caller Information During
Incoming Calls
When an incoming call is received, the
screen will display: A) the name,
B) number, D) date and T) time.
OR
PRIVATE will appear if the name and/or
number of the caller are blocked.
OR
UNKOWN will appear if the name
and/or number of the incoming call are
not available.
OR
NO DATA SENT if data is not sent.
OR
MESSAGE ERROR will appear if the
wrong data was received from the
phone line.
Once the phone is answered, the display
will resort to a call timer.
The NEW call icon will light indicating
there is at least one (1) new call to
review. In addition, the MODE button
will flash indicating a new call.
The REPEAT call icon will light if the
Clarity 510 receives more than one call
from the same number.
The FORWARD icon will light when the
Clarity 510 receives a call forwarded
from another number.
Viewing the Caller List
Press MODE once and use the
(
▲ ▼) UP or DOWN arrows to scroll
through entries. Records will be listed in
the order they were received.To exit
the CID mode, press MODE twice; the
phone will return to stand-by mode.
END OF LIST will appear when the end
of the call list is reached.
Placing a Call from the List
Press MODE once and use the arrow
UP or DOWN to locate the desired
record. Dialing can be done in two ways:
1. Press ENTER twice, then lift handset
as indicated on the screen.
2. Lift handset while the entry is
displayed, then press ENTER twice.
Operating Your Telephone
E
N
G
L
I
S
H
19
Caller ID Screen Icons