Filter
Top Products
15
All the backlight keypad functions are
valid in either position of the nitelite
switch.
Hold
This feature allows you to put a call on
hold in order to transfer the call to
another extension, or have a private
conversation that you do not want the
person on the other end of the call to
hear. Once the Hold feature is activated,
the HOLD INDICATOR will illuminate.
When Clarity 510 is on hold, the hand-
set can be placed in the cradle, and
another extension on the phone line
can be used to pick up the call.
To use the Hold feature, press the
HOLD button once.The RED HOLD
INDICATOR will turn on and the mes-
sage PHONE ON HOLD will flash
across the screen. Phone calls can be
removed from HOLD one of the follow-
ing ways: press the HOLD button again,
lift receiver out of cradle, pick up anoth-
er extension in your home, or if you did
not return the handset to the cradle -
press and release the hook switch once.
The HOLD INDICATOR will turn off.
Operating Your Telephone
E
N
G
L
I
S
H
Visual Ringer
With the DC power source attached,
the backlit keypad will flash to alert of
an incoming call.This feature can be
enabled/disabled in the Setup Menu (see
page 12).
Large Multi Function LCD
An adjustable LCD shows the number
you are dialing, displays numbers stored
into the PhoneBook and, with Caller ID
service displays information about the
caller before you answer.
Backlit Keypad
The keypad is backlit.The keypad’s back-
light will be ON when the handset is
lifted from the cradle, to make dialing
easier in low light conditions, and to
make the phone visible when answering
a call. If the Visual Ringer is set to ON
(in Setup Menu), the keypad will flash
when the phone rings (see page 12).
Nitelite
The Nitelite softly illuminates the key-
pad when the phone is in stand by
mode (not in use), so that the user can
easily find the telephone in the dark.
The Nitelite can be turned off with a
switch on the right side of the tele-
phone that provides OFF/ LO/ HI oper-
ation.