Filter
Top Products
8
Back of Phone
Wall-Mount
Bracket
INSTALLATION
To Install As a Wall Unit:
Important: A modular wall jack with raised mounting pins is required for
installation as a Wall Unit.
The Clarity C1000 comes assembled with mounting bracket attached in desk
mount position. For wall mounting simply remove bracket, rotate 180 degrees and
reattach as shown.
• Plug one end of the telephone line cord (long, flat) into the back of the
Clarity telephone.
• Attach the wall-mounting bracket to the bottom of the Clarity telephone.
It snaps into place. The cord should run underneath the wall mounting bracket.
• Plug the other end of the telephone line cord into the wall jack with raised
mounting pins. You can store excess line cord inside the wall mounting bracket.
Note: If the wall-mounting bracket is already placed in the desk mount position,
remove it by pressing the tabs and turning it 180° per the key shown for the
wall-mount.