Filter
Top Products
12
For Low Frequency, Loud Ring
Look On Right
Edge of Case
Volume
Pitch
Sound Level Indicator
This LED signal indicates if there is speech or sound present on the line. It will be
bright and steady when a dial tone is present. It will flash in rhythm with a busy
signal and will flicker when the person on the other end is speaking. This feature is
designed to assist those individuals with a more profound hearing loss.
Ringer Controls
The Clarity C1000 comes with a Special Low-Frequency Ringer designed to be
easily heard by everyone.
The ringer also comes with a volume and pitch adjustment, allowing it to be
tailored to each user.
The ringer Volume Control has three settings: OFF, LOW, and HIGH. It is suggested
that you set the volume control to high when you first start using your Clarity
telephone. To do this, slide the ringer volume control toward the largest dot.
The ringer also has a Pitch Control that has three settings: LOW, MED, and HIGH.
The low frequency is typically the easiest for people with partial hearing loss to
hear. It is suggested that you set the pitch control to low (the smallest dot) when
you start using the phone.
Visual Ringer
A lighted ringer works in conjunction with the low frequency ringer. It sends out
a visual flashing alert every time a phone call is coming in. (This ringer will light up
regardless of the setting on the ringer volume control.)
Tone/Pulse Selection
The Clarity C1000 can be used as either a TONE (touch dial) or PULSE (rotary
dial) phone. Tone dialing is required for using special phone services such as long
distance calling. Please check with your local phone company on certain types of
service.
C1000 FEATURES