Filter
Top Products
21
TROUBLESHOOTING
Unable To Hear Phone Ringer
Make sure the ringer volume is not set to OFF.
Slide the volume adjustment switch to the large dot and the pitch adjustment
switch to the small dot. This will cause the ringer to sound at its loudest and
lowest frequency. Typically, low frequencies are easier for people with hearing
loss to detect.
Consider purchasing a variable pitch auxiliary ringer such as the Clarity WR-100.
These devices are exceptionally loud and can be plugged into any phone outlet in
your home.
User Hears Radio or CB Transmissions On The Phone
Contact your local phone company to have your telephone line checked. A Radio
Frequency Interference (RFI) filter may be put on the line to minimize this problem.
If you have any telephone service problems, first make sure you have followed all
of the installation procedures outlined in this user’s guide. Then try to determine
if the source of the problem is the Clarity phone itself or your phone service. To
do this, disconnect the Clarity C1000 and plug in your standard telephone. If the
trouble persists with the standard telephone, inform your telephone company.
If the trouble is related to only the Clarity phone, review the installation
procedures and the troubleshooting guide before referring to the Limited
Warranty stated later in this user guide.