Cisco Systems OL-4314-01 IP Phone User Manual


  Open as PDF
of 14
 
Chapter 3 Setting Up the Cisco IP Phone
Configuring Startup Network Settings
3-14
Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3
OL-4314-01
If the main LCD screen appears, the phone has started up properly. If the phone
does not start up properly, see the “Resolving Startup Problems” section on
page 9-2.
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network
settings on the Cisco IP Phone after installing the phone on the network:
• IP address
• IP subnet mask
• Default gateway IP address
• Domain name
• DNS server IP address
• TFTP server IP address
Collect this information and see the instructions in Chapter 4, “Configuring
Settings on the Cisco IP Phone.”
 previous