Filter
Top Products
12-22
System Test Architecture Reference Manual for IP Telephony
OL-11591-01
Chapter 12 IP Video Telephony Configuration
Cisco Unified CallManager Configuration for IP Video Telephony
In addition to Cisco RSVP Agent, you can use Cisco Unified CallManager region and location settings
to establish video bandwidth for a call. However, with the introduction of RSVP agent in video call, the
following rule is required to establish the bandwidth for a video call:
end-to-end video region = minimum of (region (A,agentA), region(agentA,agentB),
region(agentB,B) and region(A,B) )
Figure 12-3 shows a basic video deployment using Cisco RSVP Agent.
Figure 12-3 Basic Video Deployment with Cisco RSVP Agent
The following configuration was used for the Cisco RSVP Agent. The codec pass-through allows the
audio transcoding of a video call:
dspfarm profile 2 transcode
codec pass-through
codec gsmfr
codec g729ar8
codec g729abr8
codec g711ulaw
codec g711alaw
rsvp
maximum sessions 8
associate application SCCP
The following command confirms that the Cisco RSVP Agent is configured properly:
SCCP Admin State: UP
User Masked Codec list: None
Call Manager: 10.10.110.11, Port Number: 2000
Priority: 1, Version: 5.0.1, Identifier: 1
Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.10.110.11, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 2
Reported Max Streams: 16, Reported Max OOS Streams: 0
Supported Codec: pass-thru, Maximum Packetization Period: N/A
Supported Codec: gsmfr, Maximum Packetization Period: 20
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Location A
Cisco Unified CallManager
SCCP
SIP
RTP
H.323
Cisco RSVP
Agent A
155487
Location B
Cisco RSVP
Agent B
SCCP
Phone
H.323
Video
Phone
SIP
Phone
SCCP
Phone
H.323
Video
Phone
SIP
Phone
RSVP/RTP