Filter
Top Products
Telco and ISP Dial Scenarios and Configurations
Small- to Medium-Scale POPs
DNC-311
Cisco IOS Dial Services Configuration Guide: Network Services
Terminal Adapter Configuration Example
The following example configures a Cisco AS5200 access server to enable PCs fitted with internal or
external terminal adapters to dial in to an IP network. The terminal adapter configuration is set up for
asynchronous to synchronous PPP conversion. In some cases, PPP authentication must be set up for the
Password Authentication Protocol (PAP). Some terminal adapters only support PAP authentication.
!
version 11.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname NAS
!
aaa new-model
aaa authentication login console enable
aaa authentication login vty tacacs+
aaa authentication login dialin tacacs+
aaa authentication ppp default tacacs+
aaa authentication ppp dialin if-needed tacacs+
enable secret cisco
!
async-bootp dns-server 10.1.3.1 10.1.3.2
isdn switch-type primary-5ess
!
controller T1 0
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 1
framing esf
clock source line secondary
linecode b8zs
pri-group timeslots 1-24
!
interface Loopback0
ip address 10.1.2.254 255.255.255.0
!
interface Ethernet0
ip address 10.1.1.10 255.255.255.0
ip summary address eigrp 10 10.1.2.0 255.255.255.0
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
interface Serial0:23
no ip address
encapsulation ppp
dialer rotary-group 0
dialer-group 1
no fair-queue
no cdp enable
!