Telco and ISP Dial Scenarios and Configurations
Large-Scale POPs
DNC-323
Cisco IOS Dial Services Configuration Guide: Network Services
Cisco AS5200 Access Server #2
The following example runs on the Cisco AS5200 access server labeled #2 shown in Figure 56:
!
version 11.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname AS5200-2
!
aaa new-model
aaa authentication login default local
aaa authentication login console enable
aaa authentication login vty local
aaa authentication login dialin radius
aaa authentication ppp default local
aaa authentication ppp dialin if-needed radius
aaa authorization exec local radius
aaa authorization network radius
aaa accounting network start-stop radius
aaa accounting exec start-stop radius
enable secret cisco
!
username admin password cisco
username MYSTACK password STACK-SECRET
sgbp group MYSTACK
sgbp member AS5200-1 10.1.1.11
sgbp member AS5200-3 10.1.1.13
sgbp member 7200 10.1.1.14
async-bootp dns-server 10.1.3.1 10.1.3.2
isdn switch-type primary-5ess
!
controller T1 0
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 1
framing esf
clock source line secondary
linecode b8zs
pri-group timeslots 1-24
!
interface Loopback0
ip address 10.1.2.126 255.255.255.192
!
interface Ethernet0
ip address 10.1.1.12 255.255.255.0
ip summary address eigrp 10 10.1.2.64 255.255.255.192
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!