Filter
Top Products
Using a Handset, Headset, and Speakerphone
Cisco Unified IP Phone 7960G and 7940G for Cisco Unified CallManager 5.0 (SIP) 33
Using a Handset, Headset, and Speakerphone
You can use your phone with a handset, headset, or speakerphone.
Tip
Once you enable mute, your phone remains muted whether you switch from speaker to handset to
headset. To cancel Mute, press .
Obtaining a Headset
Your phone supports four- or six-wire headset jacks. For information about purchasing headsets, see
the “Headset Information” section on page 13.
If you want to... Then...
Use the handset Lift the handset.
Use a headset Press to toggle headset mode on and off.
You can use the headset in conjunction with all of the controls on
your phone, including and .
Use the speakerphone Press to toggle speakerphone mode on or off.
Many of the actions you can take to dial a number or answer a call
will automatically trigger speakerphone mode, assuming that the
handset is in its cradle and is not lit.
Switch to the speakerphone or
headset (from the handset)
during a call
Press or , then hang up the handset.
Switch to the handset (from the
speakerphone or headset)
during a call
Lift the handset. There is no need to push any buttons.
Adjust the volume level for a
call
Press during a call or after invoking a dial tone.
This action adjust the volume for the handset, speakerphone, or
headset, depending on which device is in use.
Press Save to preserve the volume level for future calls.