Advanced Call Handling
Cisco Unified IP Phone 7960G and 7940G for Cisco Unified CallManager 5.0 (SIP) 31
Using Call Waiting
You can configure your phone to ring when a call is on hold while you are on another active call.
Using Call Hold Ringback
You can configure your phone to ring when a call is on hold when you end an active call.
Using Stutter Message Waiting
You can configure your phone to alert you when there is a message waiting. When you receive dial
tone to make a call, you will hear a stutter dial tone.
If you want to... Then...
Configure Call Waiting 1. Press > Call Preferences > Call Waiting.
2. Select Yes, and then press Save.
Turn off Call Waiting 1. Press > Call Preferences > Call Waiting.
2. Press No, and then press Save.
If you want to... Then...
Configure Call Hold Ringback 1. Press > Call Preferences > Call Hold Ringback.
2. Select Yes, and then press Save.
Turn off Call Hold Ringback 1. Press > Call Preferences > Call Hold Ringback.
2. Press No, and then press Save.
If you want to... Then...
Turn on Stutter Message Waiting 1. Press > Call Preferences > Stutter Msg.Waiting.
2. Select Yes, and then press Save.
Turn off Stutter Message Waiting 1. Press > Call Preferences > Stutter Msg.Waiting.
2. Press No, and then press Save.