Filter
Top Products
46-9
Cisco CallManager Administration Guide
78-10450-02
Chapter 46 Configuring Cisco IP Phones in Cisco CallManager
Configuring Cisco IP Phones
Location Specifies the remote location
accessed using restricted
bandwidth connections.
Calling Search Space Specifies the collection of Route
Partitions searched to determine
how a dialed number should be
routed.
Button Template Determines the configuration of
buttons on a phone and identifies
which feature (line, speed dial,
and so on) is used for each
button.
The value entered here overrides the default
value for this type of device. Refer to the
“Setting Device Defaults” section on
page 15-1.
Not available for H.323 clients or CTI ports.
H.323 Client-Specific Device Information
Outgoing Caller ID
Pattern
Specifies the number to send as
Caller ID for outgoing calls.
For example, in North America:
• NNNXXXX = variable Caller ID,
where XXXX is equal to an extension
number or directory number (X is a
number from 0 to 9) and NNN is the
office code. The Central Office (CO)
prepends the number with the area code
if you do not specify it.
• 5555000 = Fixed Caller ID. Use when
you want the Corporate number to be
sent instead of the exact extension from
which the call is placed. The CO
appends the number with the area code
if you do not specify it.
Table 46-1 IP Phone Configuration Settings (continued)
Field Description Usage Notes