Filter
Top Products
Chapter 46 Configuring Cisco IP Phones in Cisco CallManager
Configuring Cisco IPPhones
46-8
Cisco CallManager Administration Guide
78-10450-02
• H.323 clients can be Symbol NetVision phones or Microsoft NetMeeting
clients.
Step 5 Enter the appropriate settings as described in Table 46-1.
These settings are not available for all phone types. Only the settings appropriate
to the selected phone type will appear on your screen.
Table 46-1 IP Phone Configuration Settings
Field Description Usage Notes
Device Information
MAC Address Media Access Control (MAC)
address that identifies
Cisco IP Phones (hardware
phones only)
Refer to the “Displaying the
MAC Address of a Phone”
section on page 46-6.
• Value must be 12 hexadecimal
characters.
• This field is only displayed for
hardware Cisco IP Phones
Device Name Identifies software-based
telephones.
• Value can include 1 to 15 characters,
including alphanumeric, dot, dash, or
underscores.
• Only available for H.323 clients and
CTI ports
Description Clarifies the purpose of the
device.
Load Information Specifies custom software for a
Cisco IP Phone.
The value entered here overrides the default
values for this type of device. Refer to the
“Setting Device Defaults” section on
page 15-1.
Device Pool Defines sets of common
characteristics for devices, such
as region, date/time group,
Cisco CallManager group, and
calling search space for
auto-registration
The value entered here overrides the default
value for this type of device. Refer to the
“Setting Device Defaults” section on
page 15-1.