Filter
Top Products
Using Basic Phone Functions
Placing or Answering a Call
Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 30
3
Cisco SPA 303
To adjust the volume of the handset or speaker, lift the handset or press the
Speaker button. Press + on the Volume button to increase the volume, or press - to
decrease the volume. Press OK.
Adjusting the Ringer Volume
Cisco SPA 301
To adjust the ringer volume, press the Vol. button when the handset is on the
phone. When the ringer volume reaches the maximum, the next button press
reduces the volume to the minimum.
Cisco SPA 303
To adjust the ringer volume, press the Volume button when the handset is on the
phone and the speaker button is off. Press OK.
Using Mute (Cisco SPA 303)
To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button glows red. Press the Mute button again to unmute.
Placing or Answering a Call
NOTE You may have to dial a number or numbers to reach an outside line. Ask your phone
administrator.
Basic techniques to place or answer a call:
• Pick up the handset.
• Press the Speaker button (Cisco SPA 303).
• Press the Headset button (Cisco SPA 303).
• Press the Answer softkey (Cisco SPA 303).
• Press a configured line button (to place a call) or a green flashing line button (to
answer a call) - Cisco SPA 303.