Filter
Top Products
Samsung Katana
Enter ##33284#. Select SCREEN. Dial a fake phone number to get the phone to update. Signal
strength is on the line that says RX Level. To exit, turn the phone off.
Samsung N240
Enter ##33284 and press OK. Select DEBUG SCREEN and press OK. Signal strength is 2nd
number on 2nd line (for example, T-XX Do XX-05). To exit, turn off phone.
Sanyo 4500 (not VM4500)
Scroll down to DISPLAY and press OK. Press 0 (zero). Will ask for Service Code – enter 040793.
Select SCREEN and press OK. Signal strength is the negative number at the bottom (for example
(-97). To exit test mode, turn off phone.
Sanyo 4900, 5150, 5300, 6200, 6400, 8100
Press ##040793 MENU. Scroll to SAVE PHONE# and press OK. Select SCREEN and press OK.
Signal strength is the 4th line down (for example, Rxlev: -XX.Xdb). Press and hold the top right or
left button to keep the field test screen from flashing. To exit, turn off phone.
Sanyo 5400, 7300, RL2500, RL7300
Press ##040793, MENU and then select SCREEN. You may havt to press the up arrow to keep
from flashing in and out. (With 7300 you may need to make a call to keep from flashing in and
out. Any fake number works fine).
Sanyo Katana
US Model: Enter ##33284# and select SCREEN. Dial a fake phone number (i.e 555-555-5555) to
get the phone to update. Signal strength is on the line that says RX Level. Canadian Model: Enter
##786# and press OK.
Sanyo MM7400, PM 8200
Press ##786#. At the screen that appears, press OK. Select SERVICE SCREEN and press OK.
The phone will display two lines of information. Dial 555-5555 SEND. (Any fake number will
work). Signal Strength is on the 4th line (for example, RxLev: -89.6 dBm). To exit, turn off phone.
Sanyo RL-4920, RL-4930, MM7400, PM8200, SCP-3100
Press ##786#. Select OK. Select SERVICE SCREEN and press OK. Two lines of information will
be displayed. Dial a fake phone number (ie: 555-555-5555) and press SEND. Signal strength
follows RxLev on the 4th line. Turn off phone to exit field test mode.
Siemens S46 (TDMA)
Press MENU, select MONITOR, RSSI, -XX. Test mode also tells frequency. To exit, press the
power button as the back button. To force TDMA, press MENU. Scroll to NETWORK. Scroll to
USER SETTING. Scroll to TDMA ONLY and press OK.
Sprint PPC 6700
Run application FieldTrial.exe located in WINDOWS folder.
www.tessco.com 800-472-7373