Filter
Top Products
Nextel i710, i730, i733, i736, i830, i836
Same as above to get into test mode. Press MENU to update signal strength.
Nextel i1000, i2000
Quickly dial #, *, MENU, RIGHT ARROW. Scroll right 6 times to find signal strength screen. Press
TRACE to update.
Nextel i830
Follow the standard #, *, MENU, RIGHT ARROW. Select RX STATUS. This phone does not
automatically update so you will need to back out to the menu and go back into RX STATUS to
update the screen.
Nokia 12xx, 51xx (except 5125), 61xx, 62xx, 71xx, 3285, 63xx, etc.
(Older TDMA/CDMA phones – does not work on newer GSM phones)
Press *3001#12345#. Scroll up 1 to FIELD TEST (some phones may say NET MONITOR instead
of FIELD TEST) and SELECT. Scroll to ENABLED and press OK. Turn phone off and then back
on. Signal strength is the upper or lower left number. After test mode is enabled it will stay in your
regular menu. To easily get in or out, press MENU, up 1 FIELD TEST and SELECT or OK. Dial
00 to get out and 01 to get back in.
Nokia 2100
Press *3001#12345#, MENU, then follow the above instructions.
Nokia 3285, 3360, 6360, (except 3590)
Go through above process. After test mode is enable it will stay in your regular menu. To easily
get in or out, press MENU, up 1 to FIELD TEST and SELECT. Dial 2100 to get out and 2101 to
get back in (or possible 0000 to get out and 2100 to get in).
Nokia 6215i
Press ##2773 then press END. Enter 000000 (six zeroes) for the User Lock Code. Signal
strength follows RX Level or RX Power. Press END to exit.
Nokia 6255, 6256 and newer CDMA Nokia phones
Follow the regular Nokia instructions above (*3001#12345#, etc). When you power the phone
back on, select NET MONITOR from the menu and enter 3202 in the entryfield and press OK to
get to the test mode screen. It will show 32-02 in the upper corner of the display. Signal strength
is the left negative number. Go back to NET MONITOR and enter 0000 to get out. (Sprint Nokia
phones: ##33284#.)
Palm Treo 600, 650, 700
Sprint: Press ##33284 and DIAL. The signal strength (RSSI Value) is on the first line. To exit,
press CANCEL. Verizon: Press #*#33284 AND dial. The signal strength (RSSI Value) is on the
first line. To exit, press CANCEL. Cingular: Press #*744625. The signal strength (RSSI Value)
is on the first line. To exit, press CANCEL.
Panasonic – Duramax, TX310, TX320
Press #7764726#. Press SEND. Scroll down to where it says NAM 1 and press OK. Scroll to
ENTER LEVEL 4. Press YES. Scroll to BUILT IN MONITOR. Press EDIT, CLEAR, 1, OK. Press
BACK, BACK TO LEVEL 1, YES, EXIT, SAVE CHANGES, YES. Signal strength is the top right
number. To get out of test mode, follow the same sequence: EDIT, CLEAR, 0, OK.
Pantech PN-210, PN-215, PN-218
Press ##2773. Press END key. Enter 000000 (six zeros) for the security code. Hit OK. Signal
strength follows RX level or RX power.
Samsung A310
www.tessco.com
Press MENU, 0, *. Then enter code 000000 (six zeros). Choose DEBUG, 4th line, last number.
800-472-7373