Filter
Top Products
HP 6315
Click on START. Select SETTINGS from the drop-down screen. Select SYSTEM tab at the
bottom of the screen. Scroll down to SELF TEST and select. Unmark all option boxes except
GSM/GPRS and click START. When the phone displays GPRS CONNECT NOW? Select NO.
The 8th line down displays Signal Strength. Click REFRESH to update Signal.
Kyocera 2035, 2135, 2235, 2255, 5135
Press 111111 (six ones). Select OPTIONS and press MENU (the upper right hand star button) or
OK to select it. Select DEBUG and press MENU or OK. Enter field debug code: 111111 or
000000 (six ones or zeros) or 040793. Scroll down to DEBUG SCREEN and press MENU or OK.
Scroll to BASIC and press MENU or OK. The signal strength is the last number on the 1st line. To
exit the field tes, select CLOSE and press MENU or OK.
Kyocera KX1 (SoHo), KX2 (Koi), Kx16 (Candid), 7135
Press 111111 (six ones). Select OPTIONS, scroll to SERVICE and press OK. Scroll down to
DEBUG and press OK. Enter 000000 (six zeros) and scroll to DEBUG SCREEN, press OK*,
select ON and press OK. Press NEXT and the signal strength is on the 2nd line (for example, Rx:
-87). To exit, press END and follow beginning instructions to * and select off.
Kyocera K9, 47, 414, 424, 434, 484, 494, 1135, 2325, 2345, 3225
Press 111111 (six ones). Select OPTIONS and press OK. Select DEBUG and press OK. Enter
field debug code: 111111 or 000000 (six ones or zeros) or 040793. Scroll down to DEBUG
SCREEN and press OK. Scroll to ON and press OK, OK, OK. The signal strength is the first
number on the 1st line. To exit the field test, turn off phone.
LG LX-350 (Sprint)
Enter ##33284#. Select Service Screen from Debug menu. Signal is after Rx power. Press CLR
to exit or power off.
LG Phones (except Sprint) 5200, etc
Press MENU, 0. Service Code, 000000 (six zeroes). Select FIELD TESTS. Select SCREEN.
Look for the line that says RX POWER. To exit, press the CLEAR button. (Note: Some phones
will require that you power the phone off. On others, you will need to take the battery off and put it
back on again.) Sprint LG phones only: ##33284#, FIELD TEST, SCREEN, etc.
LG PM-225, PM-325, MM-535, LX5400
Press ##33284# or ##33284 then press the blue OK button. If asked for a password, it is usually
040793 or 000000. Choose DEBUG SCREEN. Signal strength is after RxPower. Press Clear or
power off to get out.
LG VX10, 520, 2000, 3100, 3200, 3300, 4400, 4500, 4600, 4700, ,
5550, 6000, 6100, 7000, 8000
Press Menu 0. Enter Service Code: 000000 (six zeros). Scroll to FIELD TEST. Press SELECT.
Scroll to SERVICE or SCREEN. Press SELECT. Signal strength is a negative number in the
center of the screen. To exit test mode, turn off phone.
LG 510
Press MENU, 3, 0. Enter Service Code: 000000 (six zeros). Scroll to TEST MODE and select.
Scroll to READ RSSI and select. To exit test mode, turn off phone.
LG Sprint Touchpoint 1100, 2100, 2200, 5250, 5350, 4NE1, 1010, 1200
Press ##33284. Select SAVE and press OK. Select SERVICE SCREEN and press OK. The
signal strength is on the 9th line down (for example, Rx power: -XX). To exit press END.
www.tessco.com 800-472-7373